Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
Protecting or Locking a Destination
Un-protecting or Unlocking a Destination
116
The window(s) just programmed will indicate the Destination name in
yellow and the current Source for that Destination in green.
1. Confirm that the desired Destination(s) are selected. In Single
Destination mode the Destination appears in the Destination window.
In Multiple Destination mode soft buttons for the selected Destinations
are illuminated on the Destination page displays.
Note
Only multiple Destinations located on the same page can be protected or
locked simultaneously. To protect or lock multiple Destinations on different
pages, access each page individually to select the Destinations.
2. Choose whether to protect or lock the Destination(s):
• To protect, press
indicating a protect operation in progress.
• To lock, press
Protect/Lock
cating a lock operation in progress.
The
button will illuminate green.
Take
3. Press
to protect or lock the Destination(s). The
Take
will then blink, which indicates that panel has been protected or locked.
• If another panel selects this Destination for control, that panel's
button will illuminate steady amber or red. If the other
Protect/Lock
panel attempts to switch this Destination, a
displayed, along with the name of the protecting panel.
• On S25 and S50 panels that lack a
when the controlled Destination is protected the Source button will
illuminate amber, and when locked it will be red.
The panel that originally protected or locked a Destination can clear those
states for that Destination.
1. Confirm the desired locked or protected Destination(s) are selected.
2. Press the
Protect/Lock
(locked Destination). The
3. Press
, the protected or locked state will then be cleared.
Take
JUPITER L-S and LCD Series Control Panel Instruction Manual
once. The button will illuminate amber,
Protect/Lock
twice. The button will illuminate red, indi-
Protect/Lock
button once (protected Destination) or twice
button will illuminate.
Take
button
Protect/Lock
or
indicator will be
P
L
button and display,
Advertisement
Table of Contents
