Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
Sticky Levels Mode (LD4 Panel)
LD4 Multiple Destination Mode
Entering Multiple Destination Mode
Selecting a Destination to Control (Multiple Destination Mode)
114
If Sticky Levels mode is ON, the level(s) involved in a breakaway Take
remain selected for subsequent Takes. To turn on Sticky Levels mode:
1. Press
Menu
. The display windows will display various modes.
2. Press the
arrow buttons to display
Up/Down
window and press its soft button.
3. The
menu will be displayed in the D1 window with its
Sticky Level
current status (ON or OFF).
4. Press
to toggle the state ON or OFF)
Take
The panel will exit Menu mode and operate with the new state.
Multiple Destination mode (sometimes referred to as "multi-bus" mode) is
in effect when various Destinations, in yellow, appear in the D1-D4 win-
dows; and level names ("video" etc.) do not appear.
This mode displays the top level (For example, video) status for 4 Destina-
tions. Additional pages of Destinations each can be accessed using the
arrow buttons. Multiple Destinations can be selected for single-Take
Down
switching.
1. Press
. The display windows will display various modes.
Menu
2. Press the
Multiple Destination?
display the page number for the display (For example,
windows' first line contains the status of 4 Destinations.
• If Destinations are undefined, the windows will show a series of
dashes. To define Destinations, see Adding or Changing a Destination Soft
Button Assignment
for one of the D1-D4 windows, to use multiple Destination mode.
1. Press the soft button next to the Destination to be controlled so it is
illuminated. Use the
Destinations.
2. Multiple Destinations on multiple pages can be selected, if desired.
JUPITER L-S and LCD Series Control Panel Instruction Manual
soft button. The D1 window will then
on page
115. You must define at least one Destination,
arrow buttons to view additional pages of
Up/Down
in the D4
Panel Config?
p00
). The D1-D4
Up/
Advertisement
Table of Contents
