Electronic Control Unit Removal Cdi; Voltage Regulator Removal (Te-Txc) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
2
H11295
1
4
GENERAL PROCEDURES
TXC 250R - 310R 2013 I.E. USA

Electronic control unit removal CDI

1
Remove: saddle and fuel tank as described in the relevant paragraphs.
Unhook the support elastic (1) then detach the connector (2) and remove the
control unit (3).
3
H11294

Voltage regulator removal (TE-TXC)

- Disconnect the connectors (1) and (2).
2
H11296
- Loosen the two retaining screws (3) and remove the regulator (4).
3
H11297
E.19
Workshop Manual Ed. 07-2012