Rear Shock Absorber Removal - Husqvarna TC 449 2011 I.E. Workshop Manual

TXC 449 - 511 2011/2012 I.E.
4
3
5
REAR SUSPENSION
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Rear shock absorber removal

H006179
- Fit a support under the engine so that the rear wheel is raised off the ground.
- Remove the saddle, the side panels and control unit as described in the cor-
responding chapters.
- Remove wiring from the top mounting point.
- Loosen lower screw (1) using two 14 mm wrenches.
- Loosen upper screw (2) using two 14 mm wrenches.
H006180
- Shift the rear cover (3) and take out the rear shock absorber (4) from the rear
right-hand side of the bike.
H006181
Upon reassembly, remove rear brake hose support (5) to insert the
torque wrench.
Tightening torque of shock absorber nuts 50 Nm - 5 Kgm - 36.88
ft-lb.
H006182
J.5
Workshop Manual Ed. 03-2012