Service Processor Setup Menu - IBM RS/6000 44P 270 Service Manual

Note: The information under the Service Processor Firmware heading in the following

1. Service Processor Setup Menu

2. System Power Control Menu
3. System Information Menu
4. Language Selection Menu
5. Call-In/Call-Out Setup Menu
6. Set System Name
99. Exit from Menus
1>
Service Processor Setup Menu
The Service Processor Setup menu shown below is accessed from the Main Menu:
1. Change Privileged-access Password
2. Change General-Access Password
3. Enable/Disable Console Mirroring:
4. Start Talk Mode
5. OS Surveillance Setup Menu
6. Reset Service Processor
7. Reprogram Service Processor Flash EPROM
8. Serial Port Snoop Setup Menu
98. Return to Previous Menu
99. Exit from Menus
1>
Note: Unless otherwise stated in the menu responses, setings become effective when
154
Service Guide
Main Menu illustration is example information only.
Service Processor Firmware
Firmware Level: sh991029
Copyright 1997, IBM Corporation
SYSTEM NAME
MAIN MENU
SERVICE PROCESSOR SETUP MENU
Currently Disabled
a menu is exited using option 98 or 99.