Warm-Up Time; Fcot (First Copy Output Time) - Dell 2135cn Service Manual

4.7 Warm-up Time

When nominal voltage is applied, the printer will proceed to standby mode from POWER-ON within 30
seconds.
Reference: Measured at 22°C, 55% RH, nominal voltage.

4.8 FCOT (First Copy Output Time)

FCOT time of the printer is shown in the table below.
The time required for the first sheet of paper to be delivered after the Copy indication is given is
calculated on the following conditions (rounded to one decimal place).
• IOT performance that the controller does not have IOT wait.
• The printer is in the standby mode. (ROS MOTOR OFF, FUSER READY)
• Paper is A4 SEF
• Document on the platen glass or the ADF.
• Except when process control is operating*1
*1:Process controller operation is process controls such as TC control, electric potential control,
cleaning cycle, registration control, and so on. Sometimes, the printer stops feeding papers for
a certain period of time while continuous printing for these operations.
- Color mode
B/W:
Color:
Version 2 2008.03.31
21.3 sec. or less
30.3 sec. or less
8 – 8
Chapter 8 Printer Specifications