Chapter 3 Removal and Replacement Procedures (RRPs)
4) Mate the flat surface of the LEVER on
the ROLL ASSY FEED with the guide of
the ADF ASSY to attach the ROLL ASSY
FEED.
5) Tilt the LEVER of the ROLL ASSY
FEED to fix the ROLL ASSY FEED.
Note: After installing the ROLL ASSY
FEED, make sure that the DOCUMENT
STOPPER is positioned between the
Rib and the Stopper on the ROLL ASSY
FEED.
3 - 147
Version
2008.03.31