Flows 2 Mcu Firmware Error 003-340 - Dell 2135cn Service Manual

Flows 2 MCU Firmware Error 003-340

Checking the error
Does the error still occur when the
power is turned off and on?
Check whether the version of the
firmware is the latest, referring to the
Printer Information via the Tool Box.
Checked by [Printer Information] of the
[Printer Settings Report] tab in Tool
Box.
For the latest version information, refer
to the Dell Support Web Site.
Is the firmware the latest version?
Checking after replacing the PWBA
MCU
Replace the PWBA MCU. (Refer to
Removal 31/ Replacement 29.)
Version 3 2008.06.13
No
Yes
No
Yes
Download the latest version of
the firmware from the Dell
Support Web Site.
1 - 60
Chapter 1 Troubleshooting
END