Dell 2135cn Service Manual page 392

Step
Checking the sealing tapes on the PHD UNIT staying
Turn off the power, and open the COVER ASSY FRONT.
Remove the PHD UNIT.
Are there sealing tapes on the PHD UNIT?
6
Checking the paper condition
7
Is the paper dry and recommended paper?
8 Is the image printed correctly?
Checking the menu settings
Check the [Advanced] tab of the [Printing Preferences] on
9
the [Properties] of the Printer Driver.
Is the [Toner Saving Mode] selected?
10 Is the image printed correctly?
Checking the faint color
Is there the faint toner?
11
Checked by [4 Colors Configuration Chart] of [Chart Print] in
[Diagnosis] tab of [Tool Box].
Checking after reseating the TONER CARTRIDGEs
Reseat the TONER CARTRIDGEs, and check that their lock
12
keys are in the lock positions.
Is the image printed correctly?
Checking the TRANSFER ASSY for connection
Open the COVER ASSY FRONT.
Are four HV terminals on the right side of the TRANSFER
ASSY, and four springs on the frame (PL4.1.11, 12, 13 and
14) dirty and/or deformed?
13
Version 1 2008.02.01
Check
1 - 364
Chapter 1 Troubleshooting
Remedy
Yes
Pull the sealing
Go to step 7.
tapes out.
Replace the paper
with a new dry and
Go to step 9. recommended
one, then go to
step 8.
End of work. Go to step 9.
Cancel the [Toner
Saving Mode], Go to step 11.
then go to step 10.
End of work. Go to step 11.
Check the original
Go to step 12.
printing data.
End of work. Go to step 13.
Clean or replace
the TRANSFER
ASSY or Go to step 14.
SPRING(s), then
go to step 14.
No