Dell 2135cn Service Manual page 645

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

9) Secure the ground wire of the ADF

ASSY to the printer with the one screw

(silver, 6mm).

10) Route the flat cable through the

HOLDER FFC, attach the CORE FERR

FFC to the flat cable of the IIT ASSY SUB.

Note: When carrying out this

procedure, ensure that the flat cable is

pulled out without a slack between the

IIT ASST SUB and the frame.

11) With the flat cable stretched tight,

bend it lightly so that it is aligned to the

underside of the HOLDER FFC.

Chapters

Table of Contents