Chapter 3 Removal and Replacement Procedures (RRPs)
3) Secure the left shaft of the ACTUATOR
SSI with the hook of the CHUTE UP,
attach the ACTUATOR SSI.
Check the ACTUATOR SSI movement, after the procedure 3 is completed.
4) Mate the two holes of the BRACKET
SNS with the bosses of the printer, secure
it with the two screws (silver, tap, 8mm).
5) Remove the paper from the TRANSFER
ASSY.
Go to the next replacement step:
Replacement 57 PHD Unit (PL4.1.21)
3 - 239
Version
2008.02.01