Dell 2135cn Service Manual page 224

A
Checking the front cover latch and
check the PHD ASSY and FUSER
ASSY installation
After opening and closing the front
cover, reseat the PHD ASSY and the
FUSER ASSY.
Warning: Do work only after the FUSER
unit has cooled to room temperature.
After reseating, is the printout still
wrinkled or damaged?
Yes
Checking the paper feeding tray
Is the damaged paper fed from the
SSF?
Yes
Is the SSF feeding the envelope?
Yes
The envelope was inserted with
the flap closed, air vacuumed,
and shot edge facing toward the
printer.
Version 2 2008.03.31
No
END
No
Tray 1 and paper check
Remove CASSETTE ASSY 250 from
the printer and reinsert the paper.
Check that the side and end guides are
No
adjusted correctly in the CASSETTE
ASSY 250. If incorrect, readjust as
necessary.
Use the Tray
Insert the CASSETTE ASSY 250 into
Feeder.
the printer.
Is the printout still wrinkled or
damaged?
Checking for foreign objects in the
paper transfer path and check the
SEPARATOR ROLLER ASSEMBLY
Remove any foreign objects in the
paper transfer path.
Reseat the SEPARATOR ROLLER
ASSEMBLY.
Is the printout still wrinkled or
damaged?
Replace the HOLDER ASSY
SEPARATOR.
(Refer to Removal 2/ Replacement 58)
1 - 196
Chapter 1 Troubleshooting
No
Yes
END
No
Yes
END