Chapter 3 Removal and Replacement Procedures (RRPs)
16) Disengage the two connectors (P/J10,
11) on the PWBA MCU (PL10.7.7), pull it
out from the hole of the PLATE ASSY
DUCT.
17) Remove the seven screws (silver, tap,
8mm) that fix the upper side of the PLATE
ASSY DUCT to the printer.
18) Remove the one screw (silver, tap,
8mm) that fixes the right side of the
PLATE ASSY DUCT to the printer.
3 - 79
Version 1
2008.02.01