Dell 2135cn Service Manual page 602

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 48 KIT TRANSFER & PIVOT (PL6.1.98)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER REAR. (Removal 17)

8) Remove the COVER SIDE L LOW. (Removal 20)

9) Remove the KIT SHAFT PIVOT. (Removal 45)

10) Remove the COVER ASSY FRONT. (Removal 46)

11) Insert the SHAFT PIVOT (PL10.2.14)

to the hole of the frame, to fix the

TRANSFER ASSY (PL6.1.7).

Note: When carrying out the work described next procedure, take care not to scratch the belt

surface of the TRANSFER ASSY.

Chapters

Table of Contents