Fip-1. 4 Paper Jam 005-110/005-121 / Job Was Finished 005-124 - Dell 2135cn Service Manual

FIP-1. 4 Paper Jam 005-110/005-121 / Job was Finished 005-124

Step
Possible causative parts:
PWBA CONT AIO (PL10.6.6)
ADF ASSY (PL10.10.1)
KIT ROLL FEED (PL10.10.97)
Checking the document
1
Does the document meet the ADF SPEC?
Checking the connector connection
2 Reseat the connector (P/J1003) on the PWBA CONT AIO.
Does the error still occur when copying?
Checking the ADF
3
Is the ADF closed against platen glass completely?
Checking the paper feeding
4
Does the ADF feed the document?
Checking the document path
5 Open the ADF Cover and check the document path.
Is there the foreign substance on the document path?
Checking after replacing the ADF ASSY
Replace the ADF ASSY.
6
(Removal 59/Replacement 2)
Does the error still occur when copying?
Checking the ADF Feed Roller installation
Is the roller installed correctly?
7
Also are they not contaminated or damaged, and rotate
smoothly?
Version 2 2008.03.31
Check
1 - 220
Chapter 1 Troubleshooting
Remedy
Yes
Use the platen
Go to step 2. mode or change
the paper type.
Go to step 3. End of work.
Close the ADF
Go to step 4.
completely.
Go to step 5. Go to step 7.
Remove the
Go to step 6.
foreign substance.
Replace the
PWBA CONT
AIO. (Removal End of work.
24/Replacement
36)
Replace the ADF
ASSY. (Removal Replace the ADF
59/Replacement Feed Roller.
2)
No