Dell 2135cn Service Manual page 530

Removal 13 KIT BLOCK PHD RIGHT (PL4.1.97)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL10.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 3)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER ASSY. (Removal 9)
5) Remove the COVER ASSY SIDE R. (Removal 10)
6) Remove the LED ASSY ERASE. (Removal 12)
Accesses Position (The 7), 8), 9) and 10) show the procedure number.)
Note: Described below is the removal procedure common among the upper and lower BLOCK
STOPPER PHD ADs (PL4.1.7).
7) Release the hook of the BLOCK
STOPPER PHD AD (PL4.1.7), using a
miniature screwdriver.
Version 1 2008.02.01
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 28
7), 8)
9), 10)