Chapter 3 Removal and Replacement Procedures (RRPs)
Removal 17 COVER REAR (PL10.1.5)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL10.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 3)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER ASSY. (Removal 9)
5) Remove the COVER ASSY SIDE R. (Removal 10)
6) Remove the COVER ASSY SIDE L. (Removal 14)
7) Remove the two screws (silver, tap,
8mm) that fix the COVER REAR
(PL10.1.5) to the printer.
8) Remove the COVER REAR from the
printer.
3 - 37
Version 1
2008.02.01