Changing The Default Settings; Setting The Time Out Option - Dell 1600n Multifunction Mono Laser Printer User Manual

5.
6. Press <Start Copy> to begin copying.
Your original document is divided into 9 portions. Each portion is scanned and printed one by one in
the following order:

Changing the Default Settings

The copy options, including contrast, image quality, copy size, and the number of copies, can be set to the
most frequently used modes. When you copy a document, the default settings are used unless they are
changed by using the corresponding buttons on the operator panel.
NOTE: While you set copy options, pressing <Cancel> cancels the changed settings and returns to the
default status.
To create your own default settings:
1. Press <Menu> on the operator panel until "Copy Setup" appears on the top line of the display.
The first menu item, "Default-Change", appears on the bottom line.
2. Press <Select> to access the menu item. The first setup option, "Contrast" appears on the bottom line.
3. Press the scroll button ( or
4. When the option you want to set appears, press <Select> to access the option.
5. Change the setting using the scroll button ( or
6. Press <Select> to save the selection.
7. Repeat steps 3 through 6, as needed.
8. To return to Standby mode, press <Return>.

Setting the Time Out Option

You can set the time the multi-function printer waits before it restores the default copy settings, if you do
not start copying after changing them on the operator panel.
1.
2.
) to scroll through the setup options.
) or enter the value using the number keypad.