Fip-1. 88 Insert Print Cart. 093-970/093-971/093-972/093-973 - Dell 2135cn Service Manual

FIP-1. 88 Insert Print Cart. 093-970/093-971/093-972/093-973

Step
Possible causative parts:
TONER CARTRIDGE (K) (PL5.1.21)
TONER CARTRIDGE (C) (PL5.1.22)
TONER CARTRIDGE (M) (PL5.1.23)
TONER CARTRIDGE (Y) (PL5.1.24)
PWBA MCU (PL10.7.7)
Does the error still occur when the power is turned OFF and
1
ON?
Checking the Toner Type
2
Is the Dell Toner seated?
Checking after reseating the TONER CARTRIDGE (Y/M/C/
K)
Reseat the TONER CARTRIDGE (Y/M/C/K), and check
3
that the lock key is in the lock position.
Does the error still occur when the power is turned OFF and
ON?
Checking after replacing the TONER CARTRIDGE (Y/M/C/
K)
Replace the TONER CARTRIDGE (Y/M/C/K). (Refer to
4
Removal 7/Replacement 53.)
Does the error still occur when the power is turned OFF and
ON?
Checking the HARN ASSY TONER CRUM for continuity
Disconnect J31 from the PWBA MCU.
Disconnect J311 (Y), J312 (M), J313 (C) or J324 (K) from
5
the connector CRUM.
Is each cable of J31 <=> J311, J312, J313 or J324
continuous?
Checking after reseating the PWBA MCU
Reseat the PWBA MCU. (Refer to Removal31/Replacement
6 29.)
Does the error still occur when the power is turned OFF and
ON?
Version 1 2008.02.01
Check
1 - 343
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. End of work.
Change the Toner
Go to step 3. Type setting to
Non-Dell Toner.
Go to step 4. End of work.
Go to step 5. End of work.
Replace the
Go to step 6. HARN ASSY
TONER CRUM
Replace the
PWBA
MCU.(Refer to End of work.
Removal 31/
Replacement 29.)
No