Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 4 ADF FEED ROLL & SEPARATOR ROLL KIT (PL10.10.97)
1) Mate the flat surface of the pivot on the
PAD ASSY SEPARATOR with the groove
of the ADF ASSY. Attach the PAD ASSY
SEPARATOR.
2) Tilt the PAD ASSY SEPARATOR to fix
the two hooks of the PAD ASSY
SEPARATOR.
3) Mate the pin on the shaft of the ROLL
ASSY FEED with the notch of the ADF
ASSY.
3 - 146
Version
2008.02.01