Dell 2135cn Service Manual page 516

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 5 SENSOR PHOTO: SSI NO PAPER (PL3.2.13)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: When carrying out the work described next procedure, take care not to move the

BRACKET SNS from the printer too far because they are connected with the harness.

4) Before working, put the paper on the

transfer belt to protect from the damage.

5) Remove the two screws (silver, tap,

8mm) that fix the BRACKET SNS

(PL3.2.28) to the printer, remove the

BRACKET SNS.

Chapters

Table of Contents