Dell 2135cn Service Manual page 603

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

12) Release the hook of the COVER

HARNESS 2 (PL6.1.8), using a miniature

screwdriver, and then remove the COVER

Note: When carrying out the work described below, leave the relay connector on the TRANSFER

ASSY harness side.

13) Release the harness from the pegs of

the TRANSFER ASSY, disengage the

connector (P/J281) of the TRANSFER

14) Release the harness coming from

printer from hook of the TRANSFER

15) Tilt the TRANSFER ASSY slowly.

16) Remove the KIT PIVOT. (Removal 47)

Chapters

Table of Contents