Chapter 3 Removal and Replacement Procedures (RRPs)
29) Release the three tabs of the
CHASSIS MCU from the holes of the
printer, remove the CHASSIS MCU
together with the PWBA MCU from the
printer.
30) Remove the one screw (silver, 6m)
that fix the HARNESS ASSY GND
(PL7.1.5) to the DRIVE ASSY SUB,
remove the HARNESS ASSY GND.
31) Release all the harnesses from the
CLAMP LOCKING (PL10.5.10).
3 - 106
Version 2
2008.03.31