Fip-1.P11 Grey Background - Dell 2135cn Service Manual

FIP-1.P11 Grey Background

Mnt01115KA
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the error mode
1
Does the error occur only during copying?
Checking the original
2
Is the original color clean?
Checking the Grey background.
3 Print the Gradation page.
Is the image printed correctly?
Checking the contaminations on the paper transfer path
4
Are there any contaminations on the paper transfer path?
5 Is the image printed correctly?
Checking the printing
Print the Windows test page after printing the color
photograph or picture. (If the color photograph or picture
6
printing is impossible, print the [4 Colors Configuration
Chart] in [Chart Print] in [Diagnosis] tab of [Tool Box].)
Is the image printed correctly?
Checking the erase lamps
Open the COVER ASSY FRONT, and remove the PHD
7 UNIT.
Cheat the safety interlock switch.
Does the four erase LEDs light correctly?
Version 3 2008.06.13
Trouble substance
There is toner stain all over or a part of the page. The stain appears as very
bright gray stain.
Possible causative parts
- LED ASSY ERASE (PL4.1.8)
- PHD UNIT (PL4.1.21)
- TRANSFER ASSY (PL6.1.7)
- PWBA CONT AIO (PL10.6.6)
- PWBA MCU (PL10.7.7)
- HARN ASSY LVPS (PL10.8.3)
Check
1 - 400
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. Go to step 3.
Change the
Go to step 5.
original.
Printing data is
incorrect, then
check the printing
Go to step 4.
data which the
problem
generated.
Clean the
contaminations
with soft cloth or Go to step 6.
cotton swab, then
go to step 5.
End of work. Go to step 6.
End of work. Go to step 7.
Go to step 11. Go to step 8.
No