Dell 2135cn Service Manual page 570

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 35 KIT BLOCK PHD LEFT (PL4.1.98)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL10.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 3)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER ASSY. (Removal 9)

5) Remove the COVER ASSY SIDE R. (Removal 10)

6) Remove the COVER ASSY SIDE L. (Removal 14)

7) Remove the COVER POLE OUT. (Removal 15)

8) Remove the COVER REAR. (Removal 17)

9) Remove the COVER TOP. (Removal 18)

10) Remove the CHASSIS ASSY LVPS. (Removal 28)

11) Remove the KIT DRIVE ASSY PH. (Removal 32)

12) Remove the KIT DRIVE ASSY MAIN. (Removal 33)

Accesses Position (The 13), 14), 15) and 16) show the procedure number.)

Note: Described next procedure is the removal procedure common among the upper and lower

BLOCK STOPPER PDH Ds (PL4.1.6).

Chapters

Table of Contents