Chapter 3 Removal and Replacement Procedures (RRPs)
4) Shift the ACTUATOR REGI OUT to left,
fix the CHUTE UP using the hook.
5) Attach the ACTUATOR REGI ROLL by
mating the hole of the ACTUATOR REGI
ROLL with the tab of the ACTUATOR
REGI OUT. Fix it using the hook of the
ACTUATOR REGI OUT.
Note: Check the ACTUATOR REGI OUT and the ACTUATOR REGI IN movement, after the
procedure 5 is completed.
Go to the next replacement step:
Replacement 11 UPPER UNIT (Reference only)
3 - 158
Version
2008.02.01