Chapter 3 Removal and Replacement Procedures (RRPs)
9) Mate the notch of the CLUTCH ASSY
DRV with the rib of the DRIVE ASSY PH,
secure the CLUTCH ASSY DRV to the
ROLL ASSY REGI with the E-ring by using
a pliers.
10) Route the harness of the CLUTCH
ASSY DRV through the hook of the DRIVE
ASSY PH.
11) Engage the connector (P/J262) of the
CLUTCH ASSY DRV, secure the relay
connector with the pegs of the DRIVE
ASSY PH.
Go to the next replacement step:
Replacement 32 CHASSIS ASSY LVPS (Reference only)
3 - 202
Version
2008.02.01