Chapter 3 Removal and Replacement Procedures (RRPs)
Removal 16 COVER ASSY ESS (PL10.1.11)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL10.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 3)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER ASSY. (Removal 9)
5) Remove the COVER ASSY SIDE L. (Removal 14)
6) Remove the COVER POLE OUT. (Removal 15)
7) Remove the one screw (silver, 6mm)
that fixes the HOUSING PIVOT
(PL10.1.13) to the printer.
8) Remove the HOUSING PIVOT from the
hole of the COVER ASSY ESS
(PL10.1.11) and the printer.
3 - 35
Version 1
2008.02.01