Dell 2135cn Service Manual page 703

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

6) Route the harness of the DRIVE ASSY

PH and the HARN ASSY KSNR REGCL

into the hole of the CHASSIS MCU, secure

the harness using the CLAMP LOCKING.

7) Engage the two connectors (P/J24, 26)

with the PWBA MCU.

8) Attach the BEARING REGI to the shaft

of the ROLL ASSY REGI, secure the

BEARING REGI with the hooks.

Chapters

Table of Contents