Flows 37 Load Ssf 024-914 - Dell 2135cn Service Manual

Flows 37 Load SSF 024-914

This error is displayed when the paper set in SSF is different in size from the paper
size defined on the PC.
In SSF, set the paper defined on the PC.
Version 3 2008.06.13
Checking the paper size
Check that the paper matches the
specifications of the printer. If not,
replace the paper.
Does the error occur when printing
using the correct paper size?
Yes
Checking the print data, paper (print media)
and paper settings
Check the followings.
- Are the print data and the paper suitable?
- Are the paper setting and paper suitable?
- Are the paper setting and print data suitable?
After checking, correct the incorrect item(s).
Does the error still occur when printing?
Yes
Reloading a correct paper to SSF
Reload a correct paper to fill the paper setup.
Does the error still occur when printing?
Yes
Replace the PWBA MCU. (Refer to Removal
31/ Replacement 29.)
No
No
No
1 - 102
Chapter 1 Troubleshooting
END
END
END