Step
Checking after reseating the PWBA HVPS
20
Reseat the PWBA HVPS.
Is the image printed correctly?
Checking after replacing the PHD UNIT
Replace the PHD UNIT. (Refer to Removal 3/Replacement
21
57.)
Is the image printed correctly?
Checking after replacing the PWBA CONT AIO
Replace the PWBA CONT AIO. (Refer to Removal 24/
22
Replacement 36.)
Is the image printed correctly?
Version 2 2008.03.31
Check
1 - 403
Chapter 1 Troubleshooting
Remedy
Yes
End of work.
Go to step 21.
End of work.
Go to step 22.
Replace the
PWBA MCU.
End of work.
(Refer to Removal
31/ Replacement
29.)
No