Chapter 3 Removal and Replacement Procedures (RRPs)
Note: When carrying out the work
described next procedure, lift the
CHASSIS LVPS slightly up, because the
notch of the CHASSIS LVPS hits the
screw.
12) Move the CHASSIS LVPS with the
PWBA LVPS (PL10.6.16) and the DUCT
FAN ASSY (PL10.6.17) slightly from the
printer.
13) Pull the harnesses out from the hole of
the CHASSIS LVPS, remove the
CHASSIS ASSY LVPS from the printer.
3 - 53
Version 1
2008.02.01