Dell 2135cn Service Manual page 708

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Replacement 31 HARN ASSY SW PWR (PL10.7.8)

1) Replace the POWER SWITCH to the

printer, and secure it with the hooks.

Note: When replacing the HARN ASSY

SW PWR, match the ON/OFF mark of

the POWER SWITCH with the mark on

the CHASSIS BREAKER.

2) Engage the connector (P/J482) to the

BREAKER GFI, replace the clamp that

secure the harness of the HARN ASSY

Note: Take care not to engage the

connectors to wrong position.

Go to the next replacement step:

Replacement 32 CHASSIS ASSY LVPS (Reference only)

Chapters

Table of Contents