Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 28 KIT DRIVE ASSY PH (PL7.1.99)
1) Attach the GEAR P2 to the shaft of
DRIVE ASSY SUB.
Note: Ensure that the GEAR P2 is
oriented to the direction shown in the
right.
2) Engage the connector (J261) of the
HARN ASSY KSNR REGCL with the
Color mode switching sensor of the
DRIVE ASSY PH, route the HARN ASSY
KSNR REGCL through the hook of the
DRIVE ASSY PH.
Note: When carrying out the work
described next procedure, take care
not to drop the coupling gear to inside.
3 - 199
Version
2008.02.01