Tray is recommended for paper feeding because sheets fed via SSF is prone to skew
depending on how the sheet is placed on SSF.
Checking the printer environment
Check that the printer is in a room
where air conditioner is operating. If the
air conditioner is not operating, turn it
on or move the printer to a room with an
air conditioner.
Are printouts still wrinkled or damaged
after turning on the air conditioner?
Checking the error mode
Does the paper damage occur when
feeding the original at the ADF?
Checking the original
Does the original meet the ADF spec.?
Checking the ADF Guides setting
Reseat the ADF Guides.
Does the error still occur when copying?
Checking the ADF Feed Roller and the
Separator Pad
Are there any damages or foreign
substances on the Roller and the Pad?
Replace the KIT ADF Rollers.
Version 2 2008.03.31
No
Yes
No
Yes
No
Yes
Use the platen mode or change
the paper type.
No
Yes
No
Yes
Replace the ADF ASSY.
END
Check that new dry recommended
paper which matches printer
specifications is being used and replace
as necessary.
Is the printout still wrinkled or
damaged?
A
END
1 - 195
Chapter 1 Troubleshooting
No
Yes
END