Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 61 ADF ASSY (PL10.10.1)
Note: The following steps show how to replace the ADF ASSY without replacing the HARN
ASSY ADF (PL10.10.7) from the printer.
For how to replace the ADF ASSY along with HARN ASSY ADF, refer to Replacement 2 KIT IIT
ASSY SUB.
1) Route the HARN ASSY ADF through
the hole of the ADF ASSY.
2) Tilt the ADF ASSY to left side, put the
tab of the COUNTER BALANCE L into the
hole of the IIT ASSY SUB. Attach the
COUNTER BALANCE L to the IIT ASSY
SUB.
3 - 250
Version 3
2008.06.13