Flows 112 Noise During Printing - Dell 2135cn Service Manual

Flows 112 Noise During printing

Work before troubleshooting.
Check the sealing tape on the PHD ASSY. if there is the sealing tape, remove it.
Checking the ADF feeding
Does the noise arise from the printer
when the original is fed from the ADF?
Checking the original
Does the original meet the ADF spec.?
Checking the ADF Feed Roller and the
Separator Pad
Are there any damages or foreign
substances on the Roller and the Pad?
Replace the KIT ADF Rollers.
Checking the paper feeding
Does the noise arise from the printer
when the paper is fed from the Tray 1?
Checking paper
Check that new dry recommended
paper which matches printer
specifications is being used and replace
as necessary.
Does noise occur during printing when
paper is transferred from Tray 1?
Replace the SEPARATOR ROLLER
ASSEMBLY.
(Refer to Removal 2/ Replacement 58.)
Version 3 2008.06.13
No
Yes
No
Yes
Change the paper type.
No
Yes
Replace the ADF ASSY.
No
Yes
No
Yes
1 - 206
Check that the position of the
SSF side guides and the paper
insertion is correct and reset as
necessary.
Check that new dry
recommended paper is being
used and replace as necessary.
END
Chapter 1 Troubleshooting