Fip-1. 37 Load Ssf 024-914 - Dell 2135cn Service Manual

FIP-1. 37 Load SSF 024-914

Step
Possible causative parts:
PWBA CONT AIO (PL10.6.6)
PWBA MCU (PL10.7.7)
Checking the paper size
1
Does the using paper size meet the specification?
2 Does the error still occur when printing?
Checking the print data, paper (print media) and paper
settings
Check the followings.
- Are the print data and the paper suitable?
3 - Are the paper setting and paper suitable?
- Are the paper setting and print data suitable?
- Are the original and the paper suitable?
After checking, correct the incorrect item(s).
Does the error still occur when printing?
Reloading a correct paper to SSF
4 Reload a correct paper to fill the paper setup.
Does the error still occur when printing?
Version 2 2008.03.31
Check
1 - 266
Chapter 1 Troubleshooting
Remedy
Yes
Use the paper that
meets the
Go to step 3.
specifications,
then go to step 2.
Go to step 3. End of work.
Go to step 4. End of work.
Replace the
PWBA MCU (refer
to Removal 31/
Replacement 29),
if not, replace the End of work.
PWBA CONT AIO
(refer to Removal
24/Replacement
36).
No