9B-8 Lighting Systems:
Rear Combination Light Replacement
CAUTION
!
If LED operation is abnormal, replace the rear combination light with a new one.
License Plate Light Components
License Plate Light Removal and Installation
Removal
1) Remove the frame cover. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
11)".
2) Disconnect the license plate light coupler (1).
3) Remove the rear fender (rear) plate (2) and rear
fender (rear) assembly (3) from the motorcycle.
2
1. License plate light bulb (12 V 5 W)
2. Lens cover
B838H29206012
1
I837H1920026-01
1
3
3. Lens
4) Remove the license plate light (4).
3
2
4
B838H29206010
B838H29206011
I837H1920025-01
I837H1920027-01
I837H1920028-01