Muffler, Muffler Chamber And Excv/Exhaust Pipe Removal - Suzuki GSX-R1000 2007 Service Manual

6-12 EXHAUST SYSTEM
If the measured voltage is more than specification, adjust the
No.2 cable adjuster as follows:
• Set the EXCVA to adjustment position. ( 6-4)
Adjusting the No.2 cable with the EXCV fully opened
can damage the EXCVA. Be sure to adjust the No.2
cable with the EXCV set in adjustment position.
• Turn out the No.2 cable adjuster
• Repeat the previous procedure until the output voltage comes
within the specified value.
• After adjusting the EXCV cables, perform 2nd step to confirm
C46 is not indicated.
MUFFLER, MUFFLER CHAMBER AND
EXCV/EXHAUST PIPE REMOVAL
• Remove the No.2 muffler joint cover
• Loosen the muffler chamber connecting bolt. (LH/RH)
NOTE:
The left and right mufflers are installed symmetrically and there-
fore the removal procedure for one side is the same as that for
the other side.
• Remove the muffler
.
. (RH only)
.