NEC Univerge SV8100 Features And Specifications Manual page 1911

UNIVERGE SV8100
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 25
Operation: Speaker
key + Press key
Code: 26 + Pickup
Group (1~8 or 1~9
or 01~64)
Operation: Speaker
key + Press key +
Pickup Group
Code: 27
Operation: Press
key + bin + Line or
Speaker key
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Code: 29
Operation: Place
call + Press key
Code: 30
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key + Press
key
Code: 31
Operation:
Store: While on call,
Press key + number
to store
Use: Press key +
Speaker key or line
Erase: Speaker key
+ Press key
Features and Specifications Manual
Table 3-5 Function Key Codes by Number (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Group Call Pickup
Group Call Pickup
Speed Dialing
Repeat Redial
Save Number Dialed
Memo Dial
When you ...
Answer a call ringing a
telephone in another
Pickup Group – if you do
not know the group
number.
Answer a call ringing a
telephone in a specific
Pickup Group.
Dial a stored System
Speed Dialing number.
Dial a stored Group Speed
Dialing number.
Activate repeat redial
while on a call.
Save, redial or check a
saved number.
Store, use or check a
Memo Dial number.
Issue 8.01
Also see
Key Lamp Status
Srvc Code
None
None
None #2 + bin
None #4 + bin
Fast Flash while
system waits to
redial
None
None
769
768
-
715
-
3 - 37