NEC Univerge SV8100 Features And Specifications Manual page 348

Issue 12.0
Restrict Code Table

When you want Code Restriction to allow most calls and restrict only selected calls, use the
Restrict Code Table. To block only 1-900 calls, for example, enter 1900 in the Restrict
Code Table. (If the same Code Restriction Class has both Permit and Restrict Code
Tables, the system restricts calls that you enter only in the Restrict Code Table. Calls
entered in both tables are not restricted.) The system provides four tables, with 60 entries
(restricted codes) in each table. A restricted code is 12 digits maximum, using 0~9,
Recall (as a wild card).
Permit Code Table

The Permit Code Table lets you set up Code Restriction so that users can dial only selected
(permitted) telephone numbers. Use this table when you want to restrict most calls. To
allow all users to dial only area code 203, for example, enter 1203 in the Permit Code
Table. 1 + 203 + NNX + nnnn are the only numbers users can dial. (If the same Code
Restriction Class has both Permit and Restrict Code Tables, the system restricts calls that
you enter only in the Restrict Code Table. Calls entered in both tables are not restricted.)
The system provides four tables, with 200 entries (permitted codes) in each table. A
permitted code is 12 digits maximum, using 0~9,
International Call Restriction

International Call Restriction lets you limit the international calls an extension user may dial.
You can build a restrict table to prevent only certain calls, or you can build a permit table to
allow only certain calls. To allow most international calls, use the International Call Restrict
Table. To prevent most international calls, use the International Call Allow Table. The
system provides 10 International Call Restrict tables with up to four digits in each table
entry and 20 International Call Allow tables, with up to six digits in each table entry. Valid
entries are 0~9,
Code Restriction for Speed Dialing

Speed Dialing can bypass or follow Code Restriction. If you allow many users to program
Speed Dialing, consider code restricting the numbers they dial. If only administrators can
program Speed Dialing, Code Restriction may not be necessary. You can separately
restrict Group and Common Speed Dialing.
Toll Digit Counting

Use Call Digit Counting to limit the number of digits local callers can dial. You can use this
option to prevent users from accessing local dial-up services. For example, set the
Maximum Number of Digits in Local Calls to seven to limit local callers to dialing the
exchange code (NNX) and local address (nnnn) only. The system provides four tables in
which you can make entries for this option. The range is 4~30 digits.
2 - 318
, and Recall (as a wild card).
#

, and Recall (as a wild card).
# 
UNIVERGE SV8100
, and
#

Code Restriction