Suzuki GSF1250 Service Manual page 243

3) Remove the valve spring retainer (4) and valve
spring (5).
4) Pull out the valve (6) from the combustion chamber
side.
5
4
5) Remove the oil seal (7) and spring seat (8).
8
6) Remove the other valves in the same manner as
described previously.
7) Remove the water outlet pipes (9).
8) Remove the intake pipes.
6
I718H1140101-01
7
I718H1140102-01
9
I718H1140103-01
I718H1140105-01
9) Remove the oil gallery plugs (cylinder head) (10).
10
Assembly
Assembly is in the reverse order of disassembly. Pay
attention to the following points:
• Tighten the oil gallery plugs (cylinder head) to the
specified torque.
CAUTION
!
Replace the gasket with new ones.
(a)
Tightening torque
Oil gallery plug (cylinder head) (a): 10 N·m (1.0
kgf-m, 7.0 lb-ft)
• Apply grease to O-ring of the intake pipe.
CAUTION
!
Replace the O-rings with new ones.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Engine Mechanical: 1D-41
10
I718H1140106-01
(a)
I718H1140107-01
I718H1140109-01