P0110-L (Use of SDS)
Step
1
1) Click the data monitor button (1).
2) Check the intake air temperature data.
°
Approx. 125
C (257
2
1) Turn the ignition switch OFF.
2) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
3) Disconnect the IAT sensor coupler.
Action
1
°
F) and more OK?
Engine General Information and Diagnosis:
Yes
Go to Step 2.
I718H1110251-01
I718H1110185-02
Go to Step 3.
I718H1110168-03
1A-64
No
Go to Step 3.
• Dg wire shorted to
the ground.
• If wire is OK, go to
Step 3.