Suzuki GSF1250 Service Manual page 487

5) Clean up the caliper, especially around the caliper
piston.
6) Assemble the new brake pad (4), insulator (5) and
shim (6).
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
4
7) Install the new brake pads.
NOTE
Make sure that the detent of the pad is seated
onto the retainer on the caliper bracket.
5
6
I718H1430019-02
I718H1430020-01
8) Tighten the caliper mounting bolt (7) and pad
mounting pin (8) to the specified torque.
Tightening torque
Rear brake caliper mounting bolt (a): 22 N·m (
2.2 kgf-m, 16.0 lb-ft)
Rear brake pad mounting pin (b): 18 N·m (1.8
kgf-m, 13.0 lb-ft)
8
(b)
7
(a)
9) Install the plug (9) to the specified torque.
Tightening torque
Pad pin plug (c): 2.5 N·m (0.25 kgf-m, 1.8 lb-ft)
NOTE
After replacing the brake pads, pump the
brake pedal several times to check for proper
brake operation and then check the brake
fluid level.
9
(c)
Rear Brakes: 4C-3
I718H1430021-02
I718H1430022-01