Suzuki GSF1250 Service Manual page 314

1F-10 Engine Cooling System:
5) Remove the thermostat connector (1) along with
bracket (7).
7
2
6) Remove the bracket (7) from the thermostat
connector (1).
7
7) Remove the connector cap (8).
5
6
1
4
3
I718H1160004-02
1
I718H1160060-01
8
I718H1160049-01
8) Remove the thermostat (9).
Installation
Install the thermostat in the reverse order of removal.
Pay attention to the following points:
• Install the thermostat.
NOTE
The jiggle valve "A" of the thermostat faces
upside.
• Tighten the thermostat connector bolts to the specified
torque.
Tightening torque
Thermostat connector bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
9
I718H1160050-01
"A"
I718H1160007-01
(a)
I718H1160069-01