Suzuki GSF1250 Service Manual page 418

2D-7 Wheels and Tires:
Installation
1) Install the collar (1) (GSF1250/S) or front wheel
speed sensor bracket (2) (GSF1250A/SA) into the
right side of the wheel.
GSF1250/S
GSF1250A/SA
2) Align the recess "A" on the speed sensor bracket
with the stopper "B" on the right front fork.
(GSF1250A/SA)
1
I718H1240010-02
2
I718H1240009-02
"B"
"A"
I718H1240046-01
3) Install the front wheel with the front axle and tighten
the front axle bolt temporarily.
WARNING
!
The directional arrow on the tire should point
to the wheel rotation, when remounting the
wheel.
4) Tighten the brake caliper mounting bolts to the
specified torque.
Tightening torque
Front brake caliper mounting bolt (a): 26 N·m (
2.6 kgf-m, 19.0 lb-ft)
WARNING
!
After remounting the brake calipers, pump
the brake lever until the pistons push the pad
correctly.
(a)
5) Hold the front axle with the special tool and tighten
the front axle bolt to the specified torque.
Special tool
(A): 09900–18740 (Hexagon socket (24
mm))
Tightening torque
Front axle bolt (a): 100 N·m (10.0 kgf-m, 72.5 lb-
ft)
I718H1240011-01
(a)
I718H1240012-01