Abs Indicator Light Inspection - Suzuki GSF1250 Service Manual

4E-17 ABS:
7) Check for continuity between "24" (B/W) at the
coupler and the battery (–) terminal, also "25" (B/W)
at the coupler and the battery (–) terminal.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
ABS control unit coupler (Harness end)
18
10 12 13
3
2 4

ABS Indicator Light Inspection

Wiring Diagram
Refer to "ABS Unit Diagram (Page 4E-8)".
Troubleshooting
Step
1 1) Check if the ABS indicator light lights up when turning
the ignition switch ON.
Does the ABS indicator light up?
2 (The ABS indicator light lights up)
1) Ride the motorcycle at more than 10 km/h (6.2 mile/h).
Does the ABS indicator light go off?
(A)
21
24 25
16
8 9
I718H1450030-03
Action
FI
Yes
Go to Step 2.
I718H1450122-04
Normal (No DTC exists) • DTC output (Refer to
I718H1450033-02
(A)
I718H1450125-01
B718H14504020
No
Go to Step 3.
"DTC (Diagnostic
Trouble Code) Output
(Page 4E-23)")
• If DTC can not be
output (the ABS
indicator light does
not flash), go to Step
7.