Front Fork Parts Inspection - Suzuki GSF1250 Service Manual

2B-9 Front Suspension:
• Install the front fork cap (1).
NOTE
Before installing the front fork cap, turn the
inner rod lock-nut (2) completely to the lower
position as shown.
• Tighten the lock-nut (2) to the specified torque.
Tightening torque
Inner rod lock-nut (a): 20 N·m (2.0 kgf-m, 14.5 lb-
ft)
• Apply fork oil lightly to the O-ring (3).
CAUTION
!
Use a new O-ring (3) to prevent oil leakage.
: Oil 99000–99001–SS8 (SUZUKI FORK OIL
SS-08 or equivalent)
• Install the front fork protector (4).
1
2
(a)

Front Fork Parts Inspection

Refer to "Front Fork Disassembly and Assembly
(Page 2B-4)".
I718H1220013-01
Inner and Outer Tubes
Inspect the inner tube sliding surface and outer tube
sliding surface for scuffing.
3
I718H1220016-01
NOTE
Fit the projection of the front fork protector to
the depression of the front fork outer tube.
4
I649G1220034-02
B718H12206005
I649G1220035-03