1E-4 Engine Lubrication System:
6) Stop the engine and remove the oil pressure gauge
and attachment.
7) Reinstall the main oil gallery plug and tighten it to the
specified torque.
CAUTION
!
Use a new gasket to oil leakage.
Tightening torque
Main Oil gallery plug (M16) (a): 35 N·m (3.5 kgf-
m, 25.5 lb-ft)
Engine Oil and Filter Replacement
Refer to "Engine Oil and Filter Replacement in Section
0B (Page 0B-10)".
Engine Oil Level Inspection
Refer to "Engine Oil and Filter Replacement in Section
0B (Page 0B-10)".
Oil Pan / Oil Strainer / Oil Pressure Regulator
Removal and Installation
Removal
1) Drain engine oil. Refer to "Engine Oil and Filter
Replacement in Section 0B (Page 0B-10)".
2) Drain engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-12)".
3) Remove the radiator (1), exhaust pipe assembly (2)
and muffler. Refer to "Radiator / Cooling Fan Motor
Removal and Installation in Section 1F (Page 1F-5)"
and "Exhaust Pipe / Muffler Removal and Installation
in Section 1K (Page 1K-3)".
8) Check the engine oil level. Refer to "Engine Oil and
Repair Instructions
4) Remove the water hoses (3). Refer to "Water Hose
B718H11506001
B718H11506002
B718H11506015
5) Remove the oil pan (4). Refer to "Engine Bottom
1
2
I718H1150021-01
Filter Replacement in Section 0B (Page 0B-10)".
Routing Diagram in Section 1F (Page 1F-3)".
Side Disassembly in Section 1D (Page 1D-53)".
(a)
I718H1150020-01
3
I718H1150022-01
4
I718H1150023-01